How to make an archiectural model

How to Make an Architectural Model?

There are 5 steps to make an architectural model

01. Consider What You Will Model

You need to consider the essence and scale of the project that you are trying to model, first of all. Whatever the project is, in the first place, you should concentrate on simple materials. An architectural model that shows the design and interior layout of the facades may be needed for certain projects, such as houses. This implies that you will be dealing with more information in a project like this. The only thing that matters is interior architecture, if you are going to design an interior model. Styles for urban design are entirely different. The level of detail needed for architectural elements would be much lower in such projects.

02. Decide the Scale

In scale, architectural model types frequently range from 1:10 to 1: 200. Depending on what the model would encompass, urban designs are typically sized between 1: 500 and 1: 2500.

03. Choose Basic Materials

You can settle on the specific materials you can use after deciding the size. Our comprehensive article about the most used materials in model making can be examined.

04. Choose Cutting and Assembly Tools

The first step in model making is cutting. Neatly cut pieces allow you to create an architectural model that is aesthetically pleasing. You can choose tools to provide sharp edges:

  • New Knife
  • Precise Knife
  • Titanium Scissors
  • Ruler
  • Metal Ruler (6 “, 12 ” or 18 “)
  • Chopping board

When using precision knives, be extremely vigilant and keep your first aid kit with you. For all the various pieces, make prototypes and then use them as models. This method makes it much simpler and quicker to cut.

You may proceed to the assembling process after cutting. When installing, you will usually need the following materials, depending on the project:

  • Adhesive sticks
  • White glue
  • Strong adhesive
  • Hot glue
  • Wood glue
  • Double-sided tape
  • Glue syringe

05. Coating Stage

Some creativity is required for this phase. There is, after all, a wide range of materials that can be differently interpreted.  Coating when:

Print the right scale and dimensions of the joints of tiles or bricks and stick them accurately on the slab walls.

For roofs, you can use corrugated paper sheets. For certain wall coverings, you can select this, too.

Thin sheets of clear plastic can also be used to denote glass, also known as clear page printing.

It can be used for balsa wood strips, elements of wood construction and other wood veneers.

A general wood impression may also offer the brownish appearance of cork layers.

The paper or foam board can be painted with coloured sprays for coloured surfaces.

In stationery, you can also use the coloured papers available.

If there are too many of a certain hue, you can buy coloured foam panels. The filling is white on the foam board, but the smooth surface is coloured.

Finally, be careful not to overdo it during the coating process. For your architectural model, think carefully what you want to represent. Too much material may produce a synthetic image, and especially non-woven data.